RE90P-12 RE90P-18
RE90P-12 RE90P-18
An 18-inch back-electret gooseneck that drops straight into a lectern and stays put.
Plug it in and start talking. The RE90P-18 is a back-electret gooseneck for the lectern, pulpit, and podium, with a tailored full-range response optimized for close-up speech. The 18-inch gooseneck has two supple joints and a rigid center tube, so position it once and it holds. The 3/4-inch base ends in a 3-pin XLR that seats into a panel-mount receptacle, and transformerless balanced output at roughly 200 ohms drives long cable runs without losing the voice.
Key features
Reach the talker, not the room
Gooseneck reaches up for natural close-up speech pickup.
Position it once
Two supple joints plus a rigid center tube hold the aim without drooping.
Drops into the lectern
3/4-inch base terminates in a 3-pin XLR that seats in a panel-mount receptacle.
Run cable as far as the install needs
Transformerless balanced output at ~200 ohms holds up over long runs.
Clean signal in busy rooms
EV RF Shield rejects RFI and GSM; powered by 9: 52 VDC phantom.
Shrug off the knocks
Back-electret element resists handling noise better than diaphragm-electret designs.
Features
Plug it in and start talking. The RE90P-18 is a back-electret gooseneck for the lectern, pulpit, and podium, with a tailored full-range response optimized for close-up speech. The 18-inch gooseneck has two supple joints and a rigid center tube, so position it once and it holds. The 3/4-inch base ends in a 3-pin XLR that seats into a panel-mount receptacle, and transformerless balanced output at roughly 200 ohms drives long cable runs without losing the voice.
- Reach the talker, not the room — gooseneck reaches up for natural close-up speech pickup.
- Position it once — two supple joints plus a rigid center tube hold the aim without drooping.
- Drops into the lectern — 3/4-inch base terminates in a 3-pin XLR that seats in a panel-mount receptacle.
- Run cable as far as the install needs — transformerless balanced output at ~200 ohms holds up over long runs.
- Clean signal in busy rooms — EV RF Shield rejects RFI and GSM; powered by 9–52 VDC phantom.
Specifications
Identification
- Series / Family
RE INSTALL SERIES
- Material Number
F.01U.391.494